Before you begin, please remember:. There is no pre-set combination code in your Key Safe. You will need to select your own combination, ideally featuring between 5 and 6 digits. Each number can only be used once. Do not use a combination that can be

<h3 id="isPasted">Setting your code for your S5 Permanent Key Safe is really easy. Here&apos;s how:</h3>Before you begin, please remember:There is no pre-set combination code in your Key SafeYou will need to select your own combination, ideally featuring between 5 and 6 digitsEach number can only be used onceDo not use a combination that can be easily guessed There is no override or reset code. Make a note of your code and store it somewhere safe. <h4 id="setting-your-combination">Setting your combination</h4>Pull open the black weather cover.Press down on the CLEAR button (located in the centre of the Key Safe) and then release.Press down on the OPEN button and remove the lid (the part with the black buttons).Slide the white plastic instruction card on the back of the lid out and remove. This will reveal ten grey buttons on the back of the lid. Each of these grey buttons corresponds to the black buttons on the front of the Key Safe. These buttons each have small arrows.&#xA0;Arrows pointing towards the locking pin are OFF and are not part of the combination. Arrows pointing away from the locking pin are ON and are part of the combination.Use the white plastic card (code change tool) provided to set your combination. &#xA0; &#xA0;<img src="https://attachments.gorgias.help/RdOkb7oZrBP2VXGN/hc/1QNmd2YYkd29XA0W/2025052110-6f78bdd7-de64-42fc-b3a6-21171aec9afe-f57db4e5-794a-46e7-befc-7d352ebb6082.png" data-id="11092251984" class="fr-fic fr-dii"> Note: Do not use a screwdriver!To add a number to your code, use the code change tool to push in the grooved button by the number you wish to set. Turn 180&#xB0; until the button pops back up completely and the arrow points in the ON direction (away from the hinge). To remove a number or letter from the code, use the code change tool to push in the grooved button by the number you wish to unset. Turn 180&#xB0; until the button pops back up completely and the arrow points in the OFF direction (towards the locking pin).Return the white plastic card over the back of the lid.&#xA0;<h4 id="testing-your-combination">Testing your combination</h4><ol start="1" type="1"><li>On the front of the Key Safe, pressing only the buttons in your combination, press each button in until it clicks. If you press the wrong button, push down on the clear button and enter your code again.</li><li dir="ltr">Press down and hold the OPEN button open. If the combination is set correctly, the locking pin will retract fully. If it does not, push down the CLEAR button and check to ensure you have entered the correct code. Refer to &quot;Setting your combination&quot; if you continue to experience difficulty.</li></ol>You must enter your code to both open and close your Key Safe. Opening and closing your Key Safe<ol start="1" type="1"><li>Once you have tested your code you will need to enter it again to close the Key Safe. Once you enter your code, you do not have to press the OPEN button until you are ready. There is no time limit between entering your code and operating the OPEN button.</li><li>Offer the bottom of the lid into the bottom of the vault, pull down on the OPEN button ensuring you keep the button pushed down. Then insert the lid into the vault. Once in place release the OPEN button. Check your Key Safe is now locked shut by sliding down the OPEN button. If correctly locked, you should not be able to open the Keysafe without re-entering your code.</li></ol>Ensure you keep a copy of your code safe and only disclose your code to those that need to know. There is no override or reset code. If you have a lifeline or pull-cord care package, be sure to inform the monitoring centre where your key safe is located and ensure they always have a record of your most recent code in case of an emergency.

S5 Permanent Key Safe code setting

Before you begin, please remember:. It may be easier to set or change your key safe code before you install it. For guidance on how to set a code in your Key Safe read the Permanent Key Safe code setting article. If possible, we recommend you install

<h3 id="isPasted">Installing your S5 Permanent Key Safe</h3>Before you begin, please remember:It may be easier to set or change your key safe code before you install it. For guidance on how to set a code in your Key Safe read the Permanent Key Safe code setting article.If possible, we recommend you install your key safe out of line of easy sight for passers-by and in a position of good light to make it easier for the user. Also consider the height of the installation to be at a level that all users can access.You must use the included masonry screwsDo not mount your key safe closer than 6&#x201D; or 15cm to the corner of a masonry surfaceMake sure your key safe is mounted flush with the masonry surface and the masonry screws are only installed directly into brick. Never install masonry screws into mortar and minimize all gaps between back of the vault and the masonry surfaceThere is no need to use rawl plugs as each screw cuts its own threadIf you are relocating your key safe you will need to purchase new masonry screws. New masonry screws can be purchased <a href="https://keysafe.co.uk/product/397/replacement-fitting-kit-for-the-permanent-and-slimline-keysafe" style=" text-decoration: none;">online</a> or by calling our customer service team on 0330 363 0303 <h4 id="installing-your-key-safe">Installing your Key Safe</h4>To correctly install your Permanent Key Safe you will need the following items: Power drill, a 5mm drill bit suitable for metal, a 4mm drill bit longer than 70mm and suitable for masonry, a P2 Screwdriver, a pencil and tape.<ol start="1" type="1"><li>Prior to fitting your Key Safe to the wall you will need to enlarge the 4 corner holes in the back of the Key Safe using your 5mm metal drill bit. This will enable the screws to pass through the vault.&#xA0;</li><li>Using the Key Safe as a guide, mark each of the 4 drill holes with pencil on your wall. Ensure that all 4 holes are going into solid brick and not into the mortar lines</li><li>Using a small amount of tape, mark the required drill depth on your 4mm masonry drill bit. We advise this to be a minimum of 70mm deep.</li><li>Once drilled, place all 4 masonry screws through the vault and use a P2 screwdriver bit to secure your Key Safe to the wall. We recommend that you screw in each masonry screw a little at a time to ensure a secure fixing. Take care not to overtighten and check that your Key Safe is flush to the wall.&#xA0;(When installing the Permanent Key Safe, before you drive the screws home, make certain the lip on the rubber weather cover is under the Key Safe before you tighten all 4 screws.)</li></ol>

S5 Permanent Key Safe Installation

For installation and coding advice, follow the below step-by step instructions. A PDF version of the user guide is available for download at the bottom of this page. S5 Permanent key safe is a convenience product, not a security product. The S5 Perma

S5 Permanent key safe user guide

Please see below the datasheet for the Kidde S5 Permanent Key Safe. This Permanent Key Safe provides convenient key storage for up to 5 door keys, depending on the key type and length. This key safe box is designed for peace of mind. This key safe ca

Please see below the datasheet for the Kidde S5 Permanent Key SafeThis Permanent Key Safe provides convenient key storage for up to 5 door keys, depending on the key type and length.&#xA0;This key safe box is designed for peace of mind. This key safe can be installed very discretely behind pipework or inside meter boxes, which protects from the eye of would-be opportunists, whilst easing your mind that in the event of lost or mislaid keys, you won&#x2019;t be stranded or forced to shell out on a locksmith.&#xA0;<h2 id="this-key-safe-is-supplied-complete-with-a-weather-cover-and-fixings">This key safe is supplied complete with a weather cover and fixings.&#xA0;</h2>This Key Safe is designed for use in conjunction with alarm systems, locked gates, and other security measures. For high level security, you may wish to consider the C500 Police Accredited Key Safe.&#xA0;&#xA0;<h2 id="looking-for-spares">Looking for spares?&#xA0;</h2>Installation requires a 4mm masonry drill bit and self-tapping masonry screws. You can protect the code changing mechanism with the code changing cover and protect from the elements with the permanent key safe weather cover.<h2 id="order-through-our-secure-payment-gateway-before-300pm-for-free-next-working-day-delivery">Order through our secure payment gateway before 3:00pm for free next working day delivery.</h2>&#xA0;<h2 id="features">Features&#xA0;</h2>&#x2022; Weight: 900g&#xA0;&#x2022; With the recommend 5 to 6 digits in your combination code there are over 1000 possible combinations&#xA0;&#x2022; Easy to install, no maintenance or power source required You can change your code as many times as you want to maintain security&#xA0;&#x2022; Comes complete with a black neoprene weather cover to protect it from the elements which, as an added security feature, acts to shield the Key Safe fascia from view&#xA0;&#x2022; Includes installation instructions and a code setting tool which must be used to set or change the code&#xA0;&#x2022; Includes a set of recommended fixings to install onto to any brick or concrete surface, these are self-tapping masonry screws to install directly into the substrate without the need for rawl plugs <img src="https://attachments.gorgias.help/RdOkb7oZrBP2VXGN/hc/1QNmd2YYkd29XA0W/2025052110-06a60884-893b-4806-a788-dbca7dcefc86-ce57345b-a2d5-4291-aa8d-04ff67d59dec.png" data-id="11092210391" class="fr-fic fr-dii">

S5 Permanent Key Safe data sheet

The easiest way to change your code is to remove the old code first so that your key safe is uncoded. Removing old code. Your key safe is now uncoded. Setting a new code. Testing your combination

The easiest way to change your code is to remove the old code first so that your key safe is uncoded. Removing old code<ol><li>Pull open the weather cover</li><li>Press down on the CLEAR button and then release</li><li>Press down on the OPEN button, keeping this button pressed down, remove the lid from the key safe</li><li>Slide the white plastic instruction card on the back of the lid out and remove it. This is your code change tool</li><li>You will see 10 grey dials on the back of the lid. Each of these corresponds to the black buttons on the front of the key safe. These dials have small arrows</li><li>Arrows pointing towards the locking pin are OFF and are not part of the code. Arrows pointing away from the locking pin are ON and are part of the code</li><li>For each number that is in your old code, use the code change tool to push in the grooved button by that number and turn it 180 degrees until the dial pops back up completely and the arrow points in the OFF direction</li></ol>Your key safe is now uncoded.Setting a new code<ol><li>To add a number to your code, use the code change tool to push in the grooved button by the number you wish to set. Turn 180&#xB0; until the button pops back up completely and the arrow points in the ON direction</li><li>Do this for each number that you want in your new code</li><li>Return the white plastic card to its slot in the back of the lid</li></ol>Testing your combination<ol><li id="isPasted">On the front of the Key Safe, pressing only the buttons in your combination, press each button in until it clicks. If you press the wrong button, push down on the clear button and enter your entire code again.</li><li dir="ltr">Press down and hold the OPEN button open. If the combination is set correctly, the locking pin will retract fully allowing you to place the lid back into the vault of the key safe. NB. You need to keep hold of the open button while placing the lid in the vault, if you let go, you will need to enter the code again in order to retract the locking pin. </li></ol>

Changing the code in your Classic Key Safe

This article relates to the Classic range of key safes which are: -. If you cannot hear a click after pressing a button, you may need to press harder or if that isn’t working it could be that you have pressed the same number more than once. You can’t

This article relates to the Classic range of key safes which are: -<ul><li style="font-size: 16px;">Portable key safe</li><li style="font-size: 16px;">S5 Permanent key safe</li><li style="font-size: 16px;">S6 Slimline key safe</li><li style="font-size: 16px;">S7 Big Box key safe</li><li style="font-size: 16px;">J5 Over the Door key safe</li></ul>If you cannot hear a click after pressing a button, you may need to press harder or if that isn&#x2019;t working it could be that you have pressed the same number more than once.You can&#x2019;t use any number more than once in your code.&#xA0;If that doesn&#x2019;t work, try pulling down the &#x2018;CLEAR&#x2019; button and starting again. If the code you are trying to enter contains the same number more than once, you have the incorrect code.

Why don't the buttons click in my Classic key safe?

The Key Safe Company

Useful resources for the Permanent KeySafe including user guide and datasheet

S5 Permanent key safe

Product Information

I have moved into a property and there is a key safe, but we don’t know the code?

Lost or Forgotten Codes

Is there a Master Override or reset Code?

I have no code, how do I remove the key safe?

I don't have the code for my key safe

DIY Installation

Where should I install my key safe?

What is the process for professional installations?

I haven’t heard from the installer yet?

Installation Service Provider

Installation day: What do I need to do?

Areas covered by our professional installation service

Installation

I have the code, but I cannot open my key safe? (C500 or P500 only)

I have the code, but cannot open my key safe (Ark Tamo & Tamo Pro only)

Why don’t the buttons click on my Key Safe?

What if my key safe freezes shut?

The clear button is stuck, what are my next steps?

The open dial just keeps turning, what do I do? - Police Preferred Range

Troubleshooting

What are the differences in the police preferred key safes?

What is the difference between the ark Tamo™ and ark Tamo Pro?

Difference between C500 & P500 key safes

Difference between the 1st & 2nd generation of C500 & P500

What are the differences between your key safes

ark Tamo Pro installation video

ark Tamo Pro coding video

ark Tamo Pro user guide

ark Tamo Pro security accreditations

ark Tamo Pro data sheet

All about the ark Tamo Pro illumination module

I have the code but cannot open my ark Tamo Pro key safe

Why don't the buttons click on my ark Tamo Pro key safe?

ark Tamo Pro key safe

How to use the ark Tamo

ark Tamo installation video

ark Tamo code setting video

Changing the code in your ark Tamo key safe

All about the ark Tamo Illumination module

ark Tamo key safe certification

ark Tamo user guide

ark Tamo data sheet

I have the code but cannot open my ark Tamo key safe

Why don't the buttons click on my ark Tamo key safe?

ark Tamo key safe

Supra P500 Pro key safe Installation Help

Supra P500 Pro Key Safe code setting help

Supra P500 Pro key safe User Guide

Supra P500 Pro Certification

Supra P500 Pro Key Safe Data Sheet

Supra P500 Pro Key Safe Upgrade

Changing the code in your Supra P500 Pro Key Safe

I have the code but cannot open my P500 Pro key safe

Why don't the buttons click on my P500 Pro key safe?

Supra P500 Pro key safe

How to operate the C500 Pro key safe

Supra C500 Pro key safe installation help

Supra C500 Pro key safe code setting help

Supra C500 Pro Key Safe User Guide

Supra C500 Pro Certification

Supra C500 Pro Key Safe Datasheet

Supra C500 Pro Key Safe Upgrade

Changing the code in your Supra C500 Pro Key Safe

I have the code but cannot open my C500 Pro key safe

I can't open the weather cover on my C500

Why don't the buttons click on my C500 Pro key safe?

Supra C500 Pro key safe

S6 Slimline Key Safe code setting

S6 Slimline Key Safe installation

S6 Slimline key safe user guide

S6 Slimline Key Safe data sheet

S6 Slimline key safe

J5 Over-the-door key safe user guide

J5 Over-the-door data sheet

J5 Over-the-door key safe

Portable key safe user guide

Portable key safe data sheet

Portable key safe

S7 Big Box key safe user guide

S7 Big Box key safe data sheet

S7 Big Box key safe

Igloo key safe FAQs

Igloo key safe user guide

Igloo key safe troubleshooting

Igloohome Padlock FAQs

Igloohome

Digital Key Ring user guide

Digital Key Ring

Opening eSafe when battery flat

eSafe user guide

eSafe - codes

The eSafe App

eSafe installation

eSafe warranty

How secure is the eSafe?

eSafe replacement fixings

eSafe

Ox Box User Guide

Ox-Box Safe

Installing the Smart Door Handle

Smart Door Handle User Manual

Smart Door Handle Technical Support

How is the Smart Door Handle powered?

Smart Door Handle

What is security certification?

Who are the LPCB?

What does police preferred mean?

Security Certifications

Product Warranty Registration

Product Warranty

Warranty Information & Registration

My weather cover has broken off, can I get a replacement?

I’m trying to change my code, but do not have the code changing tool.

Replacement Illumination Module for Tamo & Tamo Pro

My clear button is missing

Replacement fitting screws for moving your key safe

Replacement Parts & Accessories

What is a key safe?

Common questions about the construction of key safes

Weather cover common questions

I can't open my weather cover

Why do the buttons click on key safes?

How soon will I get my key safe after ordering online?

Are your key safes exempt from VAT?

Key Safe Recycling Scheme

Is it true that the code digits can be entered in any order? Does this compromise code security?