Before you begin, please remember:. Pull open the black weather cover. Press down on the CLEAR button (located in the centre of the KeySafe) and then release. Press down on the OPEN button and remove the lid (the part with the black buttons). Slide t

<h3 id="isPasted">Setting your code for your Kidde S6 Slimline KeySafe&#x2122;&#xA0;is really easy. Here&apos;s how.&#xA0;</h3>Before you begin, please remember:<ul><li>There is no pre-set combination code in your Key Safe</li><li>You will need to select your own combination, ideally featuring between 5 and 6 digits</li><li>Each number can only be used once</li><li>Do not use a combination that can be easily guessed</li><li>There is no override or reset code. Make a note of your code and store it somewhere safe</li></ul> <h4 id="setting-your-combination">Setting your combination</h4>Pull open the black weather cover.Press down on the CLEAR button (located in the centre of the KeySafe) and then release.Press down on the OPEN button and remove the lid (the part with the black buttons).Slide the white plastic instruction card on the back of the lid out and remove. This will reveal ten grey buttons on the back of the lid. Each of these grey buttons corresponds to the black buttons on the front of the KeySafe. These buttons each have small arrows. Arrows pointing towards the locking pin are OFF and are not part of the combination. Arrows pointing away from the locking pin are ON and are part of the combination.Use the white plastic card (code change tool) provided to set your combination.<img src="https://attachments.gorgias.help/RdOkb7oZrBP2VXGN/hc/1QNmd2YYkd29XA0W/2025052110-63525765-9a5f-444e-a68b-a60731c7e837-9b655941-48b9-424e-a243-56da4f8835a9.png" data-id="11092252969" class="fr-fic fr-dii" style="width: 355px;"> Note: Do not use a screwdriver!To add a number to your code, use the code change tool to push in the grooved button by the number you wish to set. Turn 180&#xB0; until the button pops back up completely and the arrow points in the ON direction (away from the hinge). To remove a number or letter from the code, use the code change tool to push in the grooved button by the number you wish to unset. Turn 180&#xB0; until the button pops back up completely and the arrow points in the OFF direction (towards the locking pin).Return the white plastic card over the back of the lid. <h4 id="testing-your-combination">Testing your combination</h4><ol start="1" type="1"><li style="font-size: 16px;">On the front of the Key Safe, pressing only the buttons in your combination, press each button in until it clicks. If you press the wrong button, push down on the clear button and enter your code again.</li><li style="font-size: 16px;">Press down on the OPEN button open. If the combination is set correctly, the locking pin will retract fully. If it does not, push down the CLEAR button and check to ensure you have entered the correct code. Refer to &quot;Setting your combination&quot; if you continue to experience difficulty.</li></ol>You must enter your code to both open and close your Key Safe. <h4 id="opening-and-closing-your-key-safe">Opening and closing your Key Safe</h4><ol start="1" type="1"><li style="font-size: 16px;">Once you have tested your code you will need to enter it again to close the Key Safe. Once you enter your code, you do not have to press the OPEN button until you are ready. There is no time limit between entering your code and operating the OPEN button.</li><li style="font-size: 16px;">Offer the bottom of the lid into the bottom of the vault, pull down on the OPEN button and keeping the open button pressed down, push the lid closed. Once in place release the OPEN button. Check your Key Safe is now locked shut by sliding down the OPEN button. If correctly locked, you should not be able to open the Keysafe without re-entering your code.</li></ol>Ensure you keep a copy of your code safe and only disclose your code to those that need to know. There is no override or reset code. If you have a lifeline or pull-cord care package, be sure to inform the monitoring centre where your key safe is located and ensure they always have a record of your most recent code in case of an emergency.

S6 Slimline KeySafe code setting

Before you begin, please remember:. It may be easier to set or change your key safe code before you install it. For guidance on how to set a code in your Key Safe contact our support centre. If possible we recommend you install your key safe out of l

Before you begin, please remember:It may be easier to set or change your key safe code before you install it. For guidance on how to set a code in your Key Safe contact our <a href="https://keysafe.co.uk/contact" style=" text-decoration: none;">support centre</a>If possible we recommend you install your key safe out of line of easy sight for passers-by and in a position of good light to make it easier for the userYou must use the included masonry screwsDo not mount your key safe closer than 6&#x201D; or 15cm to the corner of a masonry surfaceMake sure your key safe is mounted flush with the masonry surface and the masonry screws are only installed directly into brick. Never install masonry screws into mortar and minimize all gaps between back of the vault and the masonry surfaceThere is no need to use rawl plugs as each screw cuts its own threadIf you are relocating your key safe you will need to purchase new masonry screws. New masonry screws can be purchased <a href="https://keysafe.co.uk/product/397/replacement-fitting-kit-for-the-permanent-and-slimline-keysafe" style=" text-decoration: none;">online</a> or by calling our customer service team on 0330 363 0303 <h4 id="installing-your-key-safe">Installing your Key Safe</h4>To correctly install your Slimline KeySafe you will need the following items: Power drill, a 5mm drill bit suitable for metal, a 4mm drill bit longer than 70mm and suitable for masonry, a P2 Screwdriver, a pencil and tape.<ol start="1" type="1"><li style="font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Prior to fitting your Key Safe to the wall you will need to enlarge the 4 corner holes in the back of the Key Safe using your 5mm metal drill bit. This will enable the screws to pass through the vault. (For the Slimline KeySafe, ensure you also drill the 4 holes through the back of the rubber weather cover.)</li><li style="font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Using the Key Safe as a guide, mark each of the 4 drill holes with pencil on your wall. Ensure that all 4 holes are going into solid brick and not into the mortar lines</li><li style="font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Using a small amount of tape, mark the required drill depth on your 4mm masonry drill bit. We advise this to be a minimum of 70mm deep.</li><li style="font-size: 16px; font-family: Arial, Helvetica, sans-serif;">Once drilled, place all 4 masonry screws through the vault and use a P2 screwdriver bit to secure your Key Safe to the wall. We recommend that you screw in each masonry screw a little at a time to ensure a secure fixing. Take care not to overtighten and check that your Key Safe is flush to the wall.</li></ol>

S6 Slimline KeySafe installation

For installation and coding advice, follow the below step-by step instructions. A PDF version of the user guide is available for download at the bottom of this page. Kidde S6 Slimline KeySafe™ is a convenience product, not a security product. A. Sett

S6 Slimline KeySafe user guide

Please see below the datasheet for the Kidde S6 Slimline KeySafe™. Overview. This Kidde Slimline KeySafe™ provides convenient key storage for up to 3 keys, depending on the style and length. This key box is designed with the home or small office in m

Please see below the datasheet for the Kidde S6 Slimline KeySafe&#x2122; OverviewThis Kidde Slimline KeySafe&#x2122; provides convenient key storage for up to 3 keys, depending on the style and length.This key box is designed with the home or small office in mind. Supplied with a weather resistant cover which doubles as a shroud to keep your keys secure from the prying eye of would-be opportunists, this outdoor key safe is ideal for allowing access to staff, cleaners or family members who can&#x2019;t seem to remember their keys!This Key Safe is designed for use in conjunction with alarm systems, locked gates and other&#xA0;security measures. For high level security, you may wish to consider the C500 Police Accredited key&#xA0;safe.&#xA0;Looking for spares?Installation may require a 4mm masonry drill bit. You can protect from tampering with the code&#xA0;changing cover and protect from the elements with the slimline key safe weather cover.Order through our secure payment gateway before 3:00pm for free next working day delivery.&#xA0;FeaturesWeight: 750gHolds up to 3 Yale type keys or 1 Chubb style mortice keyOver 1,000 possible combinations when using the recommended 5 &#x2013; 7 digits. You can change your code as many times as you want to maintain security.Includes a black neoprene weather cover to protect it from the elements which, as an added security feature, acts to shield the Key Safe fascia from viewIncludes a set of installation instructions and a code setting tool which must be used to set or change the codeIncludes fixings to install onto any brick or concrete surface<img src="https://attachments.gorgias.help/RdOkb7oZrBP2VXGN/hc/1QNmd2YYkd29XA0W/2025052110-243d792d-d5e4-4258-865c-b36701e4b804-f0b53eed-e270-4a14-9c68-8989882131d6.png" data-id="11092212393" class="fr-fic fr-dii">

S6 Slimline KeySafe data sheet

The Key Safe Company

Useful resources for the Slimline KeySafe

S6 Slimline KeySafe

Product Information

I have moved into a property and there is a keysafe, but we don’t know the code?

Lost or Forgotten Codes

Is there a Master Override or reset Code?

I have no code, how do I remove the key safe?

I don't have the code for my key safe

DIY Installation

What is the process for professional installations?

I haven’t heard from the installer yet?

Installation Service Provider

Installation day: What do I need to do?

Areas covered by our professional installation service

Installation

I have the code, but I cannot open my Keysafe? (C500 or P500 only)

I have the code, but cannot open my Keysafe (Ark Tamo & Tamo Pro only)

Why don’t the buttons click on my KeySafe?

What if my KeySafe freezes shut?

The clear button is stuck, what are my next steps?

The open dial just keeps turning, what do I do? - Police Preferred Range

Troubleshooting

What are the differences in the police preferred key safes?

What is the difference between the ark Tamo™ and ark Tamo Pro?

Difference between C500 & P500 key safes

Difference between the 1st & 2nd generation of C500 & P500

What are the differences between your key safes

ark Tamo Pro user guide

ark Tamo Pro installation video

ark Tamo Pro data sheet

ark Tamo pro coding video

ark Tamo Pro Key Safe

ark Tamo code setting video

ark Tamo installation video

All about the ark Tamo Illumination module

ark Tamo user guide

ark Tamo data sheet

Changing the code in your ark Tamo key safe

ark Tamo Key Safe

Supra P500 Pro KeySafe code setting help

Supra P500 Pro KeySafe Installation Help

Supra P500 Pro KeySafe User Guide

Supra P500 Pro KeySafe Data Sheet

Supra P500 Pro KeySafe Upgrade

Changing the code in your Supra P500 Pro KeySafe

Supra P500 Pro KeySafe

Supra C500 Pro KeySafe Code Setting Help

Supra C500 Pro KeySafe Installation Help

Supra C500 Pro KeySafe User Guide

Supra C500 Pro KeySafe Datasheet

Supra C500 Pro KeySafe Upgrade

Changing the code in your Supra C500 Pro KeySafe

Supra C500 Pro KeySafe

S5 Permanent KeySafe code setting

S5 Permanent KeySafe Installation

S5 Permanent KeySafe user guide

S5 Permanent KeySafe data sheet

Changing the code in your Classic KeySafe

S5 Permanent KeySafe

J5 Over-the-door KeySafe user guide

J5 Over-the-door KeySafe

Portable KeySafe user guide

Portable KeySafe

S7 Big Box Key Safe user guide

S7 Big Box KeySafe

Digital Key Ring user guide

Digital Key Ring

Opening eSafe when battery flat

eSafe user guide

eSafe - codes

The eSafe App

eSafe installation

eSafe warranty

How secure is the eSafe?

eSafe replacement fixings

eSafe

Product Warranty Registration

Product Warranty

Warranty Information & Registration

My weather cover has broken off, can I get a replacement?

I’m trying to change my code, but do not have the code changing tool.

Replacement Illumination Module for Tamo & Tamo Pro

My clear button is missing

I need more screws

Replacement Parts & Accessories

What is a KeySafe?

Why do the buttons click on Key Safes?

How soon will I get my key safe after ordering online?

Are your Key Safes exempt from VAT?

Key Safe Recycling Scheme

Is it true that the code digits can be entered in any order? Does this compromise code security?