S7 Big Box Key Safe user guideUpdated 2 months ago

For installation and coding advice, follow the below step-by step instructions. 

A PDF version of the user guide is available for download at the bottom of this page. 

General 

S7 Big Box Key Safe is a convenience product, not a security product. 

There is no pre-set combination on your Key Safe. Select your own combination. Each number in a combination can only be used once. 

Do not use a number combination that can be easily guessed, such as telephone numbers or birthdays. 

Use five to six numbers in your combination. 

A. Setting your combination 

Press down on the CLEAR button. 

Press down on the OPEN button.

Pull out the lid. 

Remove the plastic card from the back of the lid. 

There are ten numbered buttons with arrows. Turn the lid so the number “1” is in the upper left. Arrows pointing to the left are not set as part of the combination. Arrows pointing to the right are set and are part of the combination. 

Use the setting tab on the plastic card to set the combination. To set a number, use the setting tab to push in the grooved arrow by the number you wish to set. Turn 180° until the arrow pops back up completely and the arrow points in the ON direction. 

Replace the plastic card on the back of the lid.

B. Testing your combination 

1. Enter your number combination (each button pressed must click when pushed down). 

2. Press down the OPEN button. If it has been set correctly, the OPEN button will slide down fully. If it has been incorrectly set, the OPEN button will not slide down fully. When this happens DO NOT return the lid to the Key Safe. Instead push down the CLEAR button and refer to the pictures in section A. Setting your combination. 

C. Mounting the S7 Keysafe

1. Remove the lid. 

2. Use a hammer/punch or screwdriver to punch out the mounting holes. 

3. Mount the KeySafe with appropriate screws on a flat surface, such as concrete or brick, preferably hidden from view.

D. Opening and Closing your KeySafe 

Enter the numbers of your combination in any order. If you have entered an incorrect combination, slide down the CLEAR button to return the buttons to their original settings.

Click the link below to download the user guide for the S7 Big Box KeySafe